Yaesu FT-101ZD - User Manual

1
This manual was downloaded from Fox Tango International
http://www.foxtango.org
PAØPGA
Scanned by

Summary

Yaesu FT-101 ZD General Description

Yaesu FT-101 ZD Technical Specifications

FT-101 ZD Front Panel Controls and Switches

FT-101 ZD Rear Panel Connections and Features

FT-101 ZD Interconnection Diagrams

FT-101 ZD Installation Guide

Preliminary Inspection and Setup Checks

Base Station Installation Procedures

Guidance for setting up the transceiver for fixed base station operation.

Mobile Installation Guidelines

Instructions for installing the transceiver in a vehicle environment.

Antenna System Considerations

FT-101 ZD Operating Procedures

Transmitter Tuning and Setup

Steps for tuning the transmitter before normal operation.

SSB Mode Operation

How to operate the transceiver using Single Sideband modes.

Final Transmitter Tuning Calibration

Calibrating the final transmitter output for optimal performance.

RF Speech Processor Adjustment

CW Mode Operation

Instructions for operating the transceiver in Morse code mode.

FT-101 ZD Select Switches and Channel Selection

FT-101 ZD Dial Calibration and Frequency Reading

FT-101 ZD System Block Diagram

FT-101 ZD Circuitry Overview

Receiver Circuitry Details

FT-101 ZD Transmitter Circuit Path

SSB Transmission Mode Circuitry

Circuit path details for Single Sideband transmission.

CW Transmission Mode Circuitry

Circuit path details for Continuous Wave transmission.

Transmit Circuit Components Overview

FT-101 ZD Common Circuit Blocks

FT-101 ZD Power Supply System

FT-101 ZD Maintenance and Alignment Procedures

General Information and Equipment Requirements

Unit Alignment Procedures

Final Amplifier Neutralization

Yaesu FT-101ZD Specifications

General

Brand	Yaesu
Model	FT-101ZD
Category	Transceiver
Language	English