EasyManua.ls Logo

Yaesu FT-2000/D - Specifications; General Specifications; Transmitter Specifications; FP-2000 Power Supply Specifications

Yaesu FT-2000/D
220 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications
General
Rx Frequency Range: 30 kHz - 60 MHz (operating)
160 - 6 m (specified performance, Amateur bands only)
Tx Frequency Ranges: 160 - 6 m (Amateur bands only)
Frequency Stability: ±0.5 ppm (after 1 minute @+77 °F [+25 °C])
±1.0 ppm (after 1 minute @+14 °F ~ +122 °F [–10 °C ~ +50 °C])
Operating Temperature Range: 14 °F ~ +122 °F (–10 °C ~ +50 °C)
Emission Modes: A1A (CW), A3E (AM), J3E (LSB, USB), F3E (FM),
F1B (RTTY), F1D (PACKET), F2D (PACKET)
Frequency Steps: 1/10 Hz (SSB, CW, & AM), 100 Hz (FM)
Antenna Impedance: 50 Ohms, unbalanced
16.7 - 150 Ohms, unbalanced (Tuner ON, 160 - 10 m Amateur bands)
25 - 100 Ohms, unbalanced (Tuner ON, 6 m Amateur band)
Power Consumption: Rx (no signal) 70 VA
(@117 VAC) Rx (signal present) 80 VA
Tx (100 W Type) 450 VA
Tx (200 W Type) 720 VA
Supply Voltage: AC: 90 VAC - 132 VAC or 180 VAC- 264 VAC
DC: DC 13.8 V ± 10% (100 W Type)
Dimensions (WxHxD): 16.1” x 5.3” x 13.8” (410 x 135 x 350 mm)
Weight (approx.): 100 W Type: 32 lbs (14.5 kg)
200 W Type: 34.1 lbs (15.5 kg)
Transmitter
Power Output: 100 W Type: 5 - 100 watts (2 - 25 watts AM carrier)
200 W Type: 5 - 200 watts
(5 - 50 watts AM carrier, 10 - 75 watts Class-A / SSB)
Modulation Types: J3E (SSB): Balanced,
A3E (AM): Low-Level (Early Stage),
F3E (FM): Variable Reactance
Maximum FM Deviation: ±5.0 kHz/±2.5 kHz
Harmonic Radiation: 100 W Type: Better than –60 dB (160 - 10m Amateur bands)
100 W Type: Better than –70 dB (6m Amateur band)
200 W Type: Better than –60 dB
SSB Carrier Suppression: At least 60 dB below peak output
Undesired Sideband Suppression: At least 60 dB below peak output
Audio Response (SSB): Not more than –6 dB from 300 to 2700 Hz
3rd-order IMD: 100 W Type: –31 dB @14 MHz 100 watts PEP
200 W Type: –31 dB @14 MHz 200 watts PEP
200 W Type: –45 dB @14 MHz 75 watts Class-A
Microphone Impedance: 600 Ohms (200 to 10 kOhms)
SPECIFICATIONS-1
FP-2000 Power Supply
Input Voltage: 90 VAC - 264 VAC, 50 - 60 Hz (Universal)
Output Voltage: 50 VDC, 13.8 VDC
Maximum Power Consumption (approx.): 720 VA
Maximum Output Current: 720 VA
Case Size (WxHxD): 3.9” x 5.3” x 13.8” (100 x 135 x 350 mm)
Weight (approx.): 7.9” lb (3.6 kg)

Related product manuals