EasyManua.ls Logo

Yaesu FT-890 - Specifications; General and Transmitter Specs; Receiver and Antenna Tuner Specs

Yaesu FT-890
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications
General Receiver
Receiving frequency range: 100 kHz
-
30 MHz
Circuit type: dual-conversion superheterodyne
Transmitting frequency ranges:
160-m band, 1.8 to 2.0 MHz
80-m band, 3.5 to 4.0 MHz
40-m band, 7.0 to 7.5 MHz
30-m band, 10.1 to 10.5 MHz
20-m band, 14.0 to 14.5 MHz
17-m band, 18.0 to 18.5 MHz
15-m band, 21.0 to 21.5 MHz
12-m band, 24.5 to 25.0 MHz
10-m band, 28.0 to 29.7 MHz
Frequency stability:
<
+
10 ppm, or
<
f
2 ppm from -10 to +50
OC
w/TCXO-3 option
Emission modes:
LSB/USB (J3E), CW (A1 A),
AM
(A3E),
FM
(F3E)
Basic frequency steps: 10 Hz for CW and SSB;
100
Hz
for
AM
and
FM
Antenna impedance: 500 nominal without
ATU
16.5 to 150Q with AT'U (unbalanced)
Supply voltage:
13.5-V
DC
f
lo%,
negative ground
Power consumption (approx.):
1.5
A
receive (no signal)
20 A transmit (100 watts)
Dimensions (WHD): 238
x
93
x
243
mm
Weight (approx.): 5.6 kg (12.3 lbs)
Transmitter
Power output:
adjustable up to 100 watts (25 watts
AM carrier)
Duty cycle: 100%
@
100 watts PEP SSB
Modulation types:
SSB: Balanced, filtered carrier
AM:
Low-level (early stage)
FM:
Variable reactance
Maximum FM deviation:
+
2.5 kHz
Harmonic radiation:
>
50 dB below peak output
Spurious radiation:
>
40 dB below peak output
SSB carrier suppression:
>
40 dB below peak output
Undesired sideband suppression:
at least
50
dB below peak output
Audio response
(SSB):
not more than -6 dB from 400 to 2600 Hz
Intermediate frequencies:
70.455 and 455 kHz, 8.215-MHz Notch IF
Sensitivity:
(for
10 dB
S/N,
0 dBp
=
1 pV)
Selectivity (-6/-60 dB):
h
1
Modes
SSB, CW wide,
AM
narrow (without options)
SSB.
CW wide.
AM
narrow w/YF-101 ootion
I
AM
(wide)
1
6kHz
1
18kHz
I
Minimum
-6
dB BW
CW narrow with Y F-100 option
CW narrow with
XF-455K-251-01 ootion
Squelch sensitivity:
1.8
-
30 MHz
(CW,
SSB, AM):
<
2.0
pV
28
-
30 MHz
(FM):
<
0.32 pV
IF
rejection (1.8
-
30 MHz):
70 dB or better
Image rejection (1.8
-
30 MHz): 70
dB
or better
IF
Shift range:
+
1.2 kHz
IF
Notch filter attenuation: 30 dB or better
Clarifier tuning
rangelsteps: f 9.99
kHz/
10 Hz
Maximum audio power output:
at least 1.5 watts into 4
Q with
<
10% THD
Audio output impedance:
4
to 8
SZ
Automatic Antenna Tuner Options
Impedance range: 16.7
-
150Q (unbalanced)
Frequency range: see Transmitting ranges, above
Min. auto-tune
&
Max. power range: 8
-
120 watts
SWR when matched: less than
1.4:l
Matching time: within 30 seconds
Maximum
-60
dB BW
2.2
kHz
2.4
kHz
4.2
kHz
4.2
kHz
500
Hz
250
Hz
1.8 kHz
700
Hz
3rd-Order IMD: -31 dB typ.
@
100
W
PEP,
14.2 MHz
Specifications are subject to change, in the interest of
1
technical improvement, without notice or obligation.
Microphone impedance: 500 to 600
R

Table of Contents

Other manuals for Yaesu FT-890

Related product manuals