Yaesu FTDX101D - Moving Memory Data to the VFO Register; Labeling Memories; Displaying the Memory Tag; Scan Skip Setting

74
M
u
V
• Moving Memory Data to the
VFO register
The contents of the currently selected Memory
Channel may be transferred into the VFO register:
1. Press the [M
u
V] key While operating in ei-
ther VFO mode, or memory channel mode, to
transfer memory channel data to the VFO.
The memory channel list will be displayed.
2. From the channel list, touch the memory
channel to select it and transfer it to the VFO.
Alternately, the memory channel may be se-
lected by rotating the [MULTI] knob.
3. Press the [M
u
V] key.
The data in the selected memory channel will
now be transferred to VFO.
• Labeling Memories
Alphanumeric labels (“Tags”) may be appended to
memory channels, to aid in recollection of the chan-
nel’s use (such as a club name, a location etc.).
1. Press the [V
u
M] key.
The memory channel list is displayed.
2. From the channel list, touch and select the
desired memory channel.
Alternately, the memory channel may be se-
lected by rotating the [MULTI] knob.
3. Touch [NAME] area on the screen.
The character input screen will be displayed.
4. Touch a character key on the display to enter
the letters, numbers, or symbols of the de-
sired label.
Up to 12 characters may be used in the cre-
ation of a label.
5. Touch [ENT] .
6. [WRITE] will turn orange, then touch [WRITE].
7. The entered characters are confirmed, and
the selected memory channel on the list is
framed in orange.
To add a label to another memory, repeat
steps 2 to 7 above.
8. Press the [V
u
M] key to save the new settings
and return to normal operation.
• Displaying the Memory Tag
The “Frequency display” or “Alpha tag display”
format may be selected.
1. Press the [V
u
M] key.
The memory channel list will be displayed.
2. From the channel list, touch and select the
desired memory channel.
Alternately, the memory channel may be se-
lected by rotating the [MULTI] knob.
3. Touch [DISPLAY TYPE] area.
4. Rotate the [MULTI] knob to select the desired
display type.
FREQ Frequency
NAME Memory Tag
5. [WRITE] will turn orange, then touch [WRITE].
6. The data is saved to the new setting, and the
selected memory channel on the list is framed
in orange.
7. Press the [V
u
M] key to save the new setting
and return to normal operation.
• Scan Skip Setting
The “Frequency display” or “Name display” format
may be selected.
1. Press the [V
u
M] key.
The memory channel list will be displayed.
2. From the channel list, touch and select the
Memory Channel to be skipped during scan-
ning.
Alternately, the memory channel may be se-
lected by rotating the [MULTI] knob.
3. Touch [SCAN MEMORY] area.
4. Rotate the [MULTI] knob to select “SKIP”,
then press the [MULTI] knob.
5. [WRITE] will turn orange, then touch [WRITE].
6. The data is saved to the new setting, and the
selected memory channel on the list is framed
in orange.
7. Press the [V
u
M] key to save the new setting
and return to normal operation.
To re-institute a channel into the scanning
loop, select “SCAN” in step 4 above.