127
Customizing Menu Settings and User Preferences
Setup menu operations: 2 TX/RX
4 Rotate the DIAL to select the desired squelch type.
1 OFF: Outputs sound whenever receiving digital
signals from Yaesu transceivers.
2 CODE: Outputs sound only when receiving signals
containing the SQL CODE corresponding
to the code you set.
3 BREAK: Regardless of the SQL CODE setting,
outputs sound when the partner station
transmits with the BREAK setting
activated.
Tip The default setting: 1 OFF
5 Press and hold for over one second.
Sets the squelch type and returns the display to the previously viewed screen.
Setting the digital mode squelch code (5 DIGITAL SQL CODE)
You can set the squelch code in digital mode.
1 Press and hold for over one second.
The Setup menu appears.
2 Rotate the DIAL to select [2 TX/RX], then press
.
3 Rotate the DIAL to select [5 DIGITAL SQL CODE],
then press
.
4 Rotate the DIAL to select the desired code.
Tips • The code can be selected from 001 to 126.
• The default setting: 001
5 Press and hold for over one second.
Sets the squelch code and returns the display to the previously viewed screen.
To Next Page
Loading...
Need help?
General
