Yakima BackSwing Installation Instructions

$POUFOUT
BackSwing
safety latch assembly (1X)
BackSwing (1X)
hitch bolt (1X)
lock washer (1X)
spring pin (1X)
hitch lock (1X)
key (2X)
stablizer bolt (1X)
stablizer nut (1X)
latch pin (1X)
e-clip (2X)
TOOLS REQUIRED:8FJHIUMJNJUT
For use with class III
and IV hitch receivers only.
250 lbs. / 113kg
All hardware must be tightened completely. Torque values are given for reference.

Yakima BackSwing Specifications

General

Weight Capacity	250 lbs
Tilt Feature	No
Swing Away Feature	Yes
Swing Away Angle	90 degrees
Material	Steel
Foldable Design	No
Compatibility	2" hitch receivers
Installation	Hitch receiver required
Lockable	Yes