1033601B-1/15
KingPin 4
TOOLS REQUIRED
adjustable wrench
9/16" wrenches (2)
1-1/4" receiver tongue
2" hitch adapter
LONG STRAP (1X)
WHEEL
STRAP (1X)
RUBBER
STRAP (12X)
It Is crItIcal that all yakIma racks and accessorIes be properly and securely attached to your vehIcle. Improper attachment could
result In an automobIle accIdent, and could cause serIous bodIly Injury or death to you or to others. you are responsIble for
securIng the racks and accessorIes to your car, checkIng the attachments prIor to use, and perIodIcally InspectIng the products
for adjustment, wear, and damage. therefore, you must read and understand all of the InstructIons and cautIons supplIed
wIth your yakIma product prIor to InstallatIon or use. If you do not understand all of the InstructIons and cautIons, or If you
have no mechanIcal experIence and are not thoroughly famIlIar wIth the InstallatIon procedures, you should have the product
Installed by a professIonal Installer such as a qualIfIed garage or auto body shop.
Part #1033601 Rev.B
DO NOT USE THIS PRODUCT WITH HITCH EXTENDERS. USE
ONLY YAKIMA ADAPTERS WITH THIS PRODUCT. DO NOT
USE ANY OTHER BRAND TONGUE ADAPTER.
PURCHASE SEPARATELY:
TubeTop
Required for bikes with
step-through/Ladies
frames or bikes with
slanted top tubes.
Part #8002531
To purchase any Yakima
accessory visit Yakima.
com or contact your
local dealer.
To Next Page
Need help?
General
