Yakima LoadWarrior - Installation Procedures; Initial Setup and Preparation; Bar Compatibility and Adjustment; Basket Attachment and Securing

1031908E-2/8
IF YOU HAVE BARS THAT CAN BE MOVED…



DO NOT ATTACH BRACKETS


   
(SIDE VIEW)
A friend
would make
this easier .





OR BARS THAT CANNOT MOVE…
Continue to STEP


Pry open the
SnapArounds,
attach them
to the LOWER
FRONT BAR.

washers, fairing


NOTE: The fairing can fold down when
carrying long slender loads.
Remove the machine screws from

NOTE
machine screws
with washers (from
LoadWarrior) into same

You may find tapered
screws with your
Extension.
MACHINE
SCREWS
TAPERED
SCREWS
DO NOT insert the tapered


EXTENSION
USERS:
Insert screws with
washers into each
of the joints and

ASSEMBLE
