MS-LxP Series Hybrid Servo DriverVersion2.0 MS-LxP Series Hybrid Servo DriverVersion2.0
9
EE-rS
Restore the backup, means read the data of
EEPROM’S backup zone in memory. This
operation doesn’t execute the action of
reading parameters in EEPROM. If users
want to use the data in backup of EEPROM,
you need to write-in once again.
EE-dEF
To restore the default parameters, means
reading all parameters default in memory
and write in EEPROM.
EE-ACL
Clear fault history
When save parameters, you need to：
① Find out level 1 menu EE,
② Enter level 2 menu EE-SET,
③ Long press ←, the screen will show StArt, 2 seconds later,
show “Finish”, which means save successfully.
Note: If you change parameter PA-2, PA-6 and PA-7, please save and
then restart the driver. For other parameters, don’t need to restart the
driver after changing.
4） Test & Run Sr-
You can only use this menu when parameter PA-2 is 1.
Level 1 menu
Level 2
menu
Function
Sr-(Test-run
mode）
Sr-On Start to run, the motor moves in fixed speed.
Sr-Off Finish, the motor stop.
5） Fault history display dE-
Query for the latest 10 historical errors：
Level 1
menu
Level 2
menu
Function
dE-
（Historical
fault
query）
dE-1
dE-01 display the latest error code, dE-02
display the last second error code,De-03……
dE-2
dE-3
dE-4
dE-5
dE-6
dE-7
dE-8
dE-9
dE-10
五、YAKO Product Warranty Terms
1、One-year warranty
All YAKO products have one year warranty. In warranty period, we provide
free maintenance service for defective product.
2
、oes not belong to the warranty as below:
Wrong wring
Change internal parts without agreement
Beyond the requirements on electrical and environment
The cooling environment is bad.
To Previous Page
Loading...
Need help?
General
