Part of ASSA ABLOYP/N YRD400-KF-0022 Rev ATrusted every day
29
Resetting Lock to Factory Defaults
When lock is reset*, it will remove the lock from the Yale
Access App and remove all pin codes and settings that
were changed.
To Reset Lock:
1. Remove battery cover and one battery.
2. Press reset button for 1 minute with the reset tool
provided in the hardware box.
3. Replace cover.
Note: If the lock was enrolled in a ZWave network prior to
reset, it will need to be set up again.
*After reset, lock must be set up with the Yale Access App.
Remove 1 battery to
reset lock.
Do not install
Smart Module with
batteries installed.
Interior Lock
Reset Pin
To Next Page
Loading...
