Press the Enter Key (*) to enter the Display Menu and the system will display the Set Date and Time Format
screen as shown in Figure 38. Press the Enter Key again to enter this submenu. For a different submenu, use
the Scroll Back Key or Scroll Forward Key to move to the desired submenu and press the Enter Key.
To return to the Display Menu, press the Scroll Back Key or Scroll Forward Key. Press the Scroll Back
Key or Scroll Forward Key a second time to return to the main menu.
The Display Menu offers these submenus (see the Table 10 topic):
•
Set Date and Time Format Menu
•
Set Daylight Saving Time Menu
•
Set Time and Date Menu
•
Set Units Menu
The sections that follow describe these submenus.
SET DATE AND TIME FORMAT MENU
A Supervisor or a Service Technician can use this menu to define the system date and time format. Figure 38
shows the title screen for this menu.
Figure 38. Set Date and Time Format Menu
To enter this submenu, press the Enter Key. Figure 39 shows the Set Date and Time Format screen that will
appear.
To Next Page
Loading...
Need help?
General
