Yale HSA3800 User Manual

PIR movement detector
Remove the fixing screw and cover assembly
and insert the three AA batteries as shown.
• The light steadily flashes for 30 seconds while
components initialise.
Door/window contact
1 Remove the cover by loosening the fixing
screw.
2 Insert the two AAA batteries as shown. The
indicator will flash briefly.
7
+
+
+
3
A
b
Keypad remote control accessory
Remove the cover and insert the PP3
battery as shown. The ‘Tx’ LED will flash
briefly while components initialise.
Smoke detector accessory
Remove the cover and insert the four AAA
batteries as shown.
Keyfob remote control accessory
Slide off the battery cover, insert the
23A/MN21 battery as shown, and replace
cover. Switch to ‘on’.
Tamper
switch
Jumper switch
Learn/Test button
Tamper
switch
Jumper
switch
Extension terminalsMagnet
Learn/Test
button
Learn/Test button
Help button accessory
Remove the cover by loosening the fixing
screw and insert the 12V battery (supplied) as
shown. Please
ensure you
observe
battery
polarity.
Downloaded from www.ukpanels.com

Yale HSA3800 Specifications

General

Brand	Yale
Model	HSA3800
Category	Security System
Language	English