P/N: C11746310 REV. AB June 2022
19
STEP 1: BRIDGE GIRDER LENGTH (AS REQUIRED)
* CHANNEL MUST BE A MINIMUM LENGTH OF THE SPAN MINUS 4'-0"
* GIRDER LENGTH TO BE DETERMINED BY SPAN LENGTH
STEP 2: MARKING CENTERLINE ON THE GIRDER (AS REQUIRED)
Check your font conguration to see if a capping channel is required.
RATED LOAD
(Tons)
MINIMUM LENGTH
OF BEAMS REQUIRED
3 Ton KIT SPAN + (1' - 4-1/2")
5 Ton KIT SPAN + (1' - 6-3/4")
To Next Page
Loading...
