P/N: C11746310 REV. AB June 2022
33
STEP 12: LOCATE AND DRILL HOLES FOR CROSS ARM SUPPORT
* REFER TO PLAN VIEW (PAGE 14) FOR NUMBER OF
CROSS ARMS AND ITS POSITION DIMENSION DETAILS.
CROSS ARM SUPPORTS NOT REQUIRED IF YOUR CONFIGURATION
INCLUDES DUAL ENDTRUCK MOTORS. YOU MAY SKIP TO PAGE 37.
RATED LOAD
(TONS)
HOLE DIAMETER
“ØD”
BOLT
DIAMETER
3 TON KIT 41/64" 5/8"
5 TON KIT 49/64" 3/4"
To Next Page
Loading...
