P/N: C11746310 REV. AB June 2022
21
STEP 3A: MARKING CENTERLINES AND HOLE LOCATIONS ON END TRUCK – UHRC
MARKING HOLE LOCATION CENTERLINES ON THE GIRDER
* REFER TO PLAN VIEW (PAGE 14) FOR DIMENSIONAL
CALCULATIONS FOR GIRDER.
BRIDGE GIRDER
FLANGE WIDTH
A
3-3/8" 2"
3-5/8" THRU 4" 2-1/4"
4-5/8" THRU 5-1/4" 2-3/4"
5-1/2" THRU 6-3/4" 3-1/2"
7" THRU 7-5/8" 4"
To Next Page
Loading...
