P/N: C11746310 REV. AB June 2022
64
STEP 17: BRIDGE TRAVEL LIMIT SWITCH INSTALLATION
NOTE: BRIDGE TRAVEL LIMIT SWITCH ONLY
INCLUDED WITH YK/SK PRODUCTS
WARNING
DO NOT UNPLUG CONNECTORS
WHILE CIRCUIT IS ENERGIZED.
BEFORE PLUGGING IN
CONNECTORS REMOVE POWER
FROM SYSTEM.
WARNING
Damage to the hoist, a dropped load, and
injury may result if limit switches fail due
to improper use. Under normal operating
conditions, stop hoist travel before engaging
limit switches. Limit switches are safety
devices and should not be used as normal
operating control.
To Next Page
Loading...
