26) If you want access to your system via the Yale View App, scan
the QR code to connect to your DVR system.
(If not click NEXT)
27) Click NEXT
28) Setup is now complete.
11
Initial setup - WiFi Kit
Initial setup for system with WiFi cameras.
The DVR system is now turned ON and
cameras are recording. System is as default
running in “Regular Mode”, which means
that cameras are recording 24 hours a day
and will overwrite the hard drive when full.
Other “Modes” and backing up recorded
video will be explained later in the manual.
The App needs to be installed
and registered before scanning.
4