16) Click Scan
17) All your connected cameras (WiFi) should now show up on the list.
If all your cameras do not show up on the list, click Scan again.
If they still do not show up, check that they are all connected to power and
camera Ethernet cables are connected to the same router as the
DVR system.
17) Click Next
19) Click Next
18) Leave box ticked and all cameras will have the same password as
you chose for the DVR system in the beginning.
xxx.xxx.x.xx SV-DB4MX-B
xxx.xxx.x.xx SV-DB4MX-B
xxx.xxx.x.xx SV-DB4MX-B
09
Initial setup for system with WiFi cameras.
Initial setup - WiFi Kit
4
To Next Page
Loading...
Need help?
General
