Yamaha 170 User Manual

0.768K-041 Printed in Japan ’02.03
EG
011632
ELECTRIC BASS
HAMAMATSU, JAPAN
CONTENTS
OVERALL ASSEMBLY ............................................ 2
CIRCUIT DIAGRAM .................................................. 4
WIRING .................................................................... 4
SPECIFICATIONS ................................................. 4
This document is printed on chlorine free (ECF) paper with soy ink.
WARNING : CHEMICAL CONTENT NOTICE!
The solder used in the production of this product contains LEAD. In addition, other electrical/
electronic and/or plastic (Where applicable) components may also contain traces of chemicals
found by the California Health and Welfare Agency (and possibly other entities) to cause cancer
and/or birth defects or other reproductive harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR
MOUTH FOR ANY REASON WHAT SO EVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not
inhale solder fumes or expose eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product,
wash your hands before handling food.
RBX170
SERVICE MANUAL

Yamaha 170 Specifications

Fingerboard

fingerboard width at 0-F	40.0 mm
fingerboard width at 12-F	56.4 mm
number of frets	24

Neck

neck thickness at 1-F	21.0 mm
neck thickness at 12-F	24.4 mm

Weight and Dimensions

scale length	863.6 mm
length	1135.0 mm
width	327.0 mm
net weight	3.15 kg
body depth	41 mm