Yamaha 40A - Page 80

3-33
E
412012
501024
N
412022
EMG71410
PROCEDURE
1) Place the gear shift lever in the neu-
tral position.
2) Push the shallow water lever down to
the release position.
3) For setting the outboard motor at the
partially tilted position, slightly tilt up
the engine until the plate turns com-
pletely
4) To return the engine to the normal
position, put the engine in Neutral,
then slightly tilt up the engine. Set the
tilt-lock lever and shallow water lever
to the lock position and slowly tilt the
engine down.
63B-9-19-3B (E) 4/18/01 11:39 AM Page 16