EAUT1624
License light bulb
replacement
1. Remove the license light cover
by removing the screws.
2. Push the bulb inward and turn
it counterclockwise.
3. Place a new bulb in the socket.
Push the bulb inward and turn
it clockwise until it engages into
the socket.
4. Install the license light cover and
the screws.
1. Taillight bulb
1. Light cover 2. License light bulb
1
2
EC000108
cC
Do not over-tighten the screws as
the lense may break.
1
PERIODIC MAINTENANCE AND MINOR REPAIR
6-22
1. Turn signal bulb
Rear
1
3. Place a new bulb in the socket.
Push the bulb inward and turn
it clockwise until it engages into
the socket.
4. Install the lense and the screws.
4VP-F8199-E1.pm65 2/4/2004, 4:21 PM48
To Next Page
Loading...
