EasyManua.ls Logo

Yamaha CDR-HD1500 Service Manual

Yamaha CDR-HD1500
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
CDR-HD1500
CDR-HD1500には販売地域によりハードディスクドラ
イブが搭載されているものと、搭載されていないものが
あります。
修理依頼を受ける際、HDDのデータは保証できないこ
とをお客様に伝えてください。
There are two types of CDR-HD1500; one equipped
with a hard disc drive and the other without it
depending on market areas.
When accepting a repair order from the user, be sure
to inform him/her that the data in HDD cannot be
guaranteed.
2005 All rights reserved.
'05.04
100951
P.O.Box 1, Hamamatsu, Japan
CONTENTS
TO SERVICE PERSONNEL ...................................... 2~4
PREVENTION OF ELECTROSTATIC DISCHARGE .... 4
FRONT PANEL .............................................................. 5
REAR PANELS .......................................................... 5~6
REMOTE CONTROL PANEL ........................................ 6
SPECIFICATIONS...................................................... 6~7
INTERNAL VIEW ........................................................... 7
DISASSEMBLY PROCEDURES / 分解手順............ 8~15
SERVICE CHECK PROCEDURES /
サービスチェック手順 ............................................ 16~19
INSPECTIONS/検 ............................................. 20~25
UPDATING FIRMWARE /
ファームウエアの更新 ......................................... 26~27
FORMATTING THE HDD / HDDのフォーマット ........ 27
ENTERING ID TO MAIN P.C.B. /
メインPCBへのID書き込み .................................... 28~29
DISPLAY DATA ..................................................... 30~31
IC DATA ................................................................. 32~39
BLOCK DIAGRAM ....................................................... 40
PRINTED CIRCUIT BOARD .................................. 41~44
SCHEMATIC DIAGRAM ........................................ 45~50
PARTS LIST ........................................................... 51~60
REMOTE CONTROL.................................................... 61
Parts List for Carbon Resistors ................................ 61
SERVICE MANUAL
HDD/CD RECORDER
CDR-HD1500
IMPORTANT NOTICE
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already
known and understood by the users, and have therefore not been restated.
WARNING: Failure to follow appropriate service and safety procedures when servicing this product may result in personal
injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons,
we advise all YAMAHA product owners that any service required should be performed by an authorized
YAMAHA Retailer or the appointed service representative.
IMPORTANT: The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and
service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable
and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please
contact the distributor's Service Division.
WARNING: Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
IMPORTANT: Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.
w
w
w
.
x
i
a
o
y
u
1
6
3
.
c
o
m
Q
Q
3
7
6
3
1
5
1
5
0
9
9
2
8
9
4
2
9
8
T
E
L
1
3
9
4
2
2
9
6
5
1
3
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
http://www.xiaoyu163.com
http://www.xiaoyu163.com

Other manuals for Yamaha CDR-HD1500

Question and Answer IconNeed help?

Do you have a question about the Yamaha CDR-HD1500 and is the answer not in the manual?

Yamaha CDR-HD1500 Specifications

General IconGeneral
Hard Drive Capacity80 GB
Frequency Response20 Hz - 20 kHz
Digital InputsOptical, Coaxial
Digital OutputsOptical, Coaxial
TypeCD Recorder
Recording MediaCD-R, CD-RW
Playback MediaCD, CD-R, CD-RW
Audio Formats SupportedMP3
Dynamic Range96dB
Analog InputsRCA
Analog OutputsRCA
Headphone OutputYes

Summary

TO SERVICE PERSONNEL

WARNING: Laser Safety

Protection of Eyes from Laser Beam

Precautions for protecting eyes from laser radiation during servicing.

PREVENTION OF ELECTROSTATIC DISCHARGE

DISASSEMBLY PROCEDURES

HDD Replacement

HDD Replacement (Continued)

P.C.B. Operation Check

P.C.B. Operation Check (Continued)

SERVICE CHECK PROCEDURES

Main Unit Fails to Operate

Troubleshooting flowchart for main unit operation failure.

MAIN P.C.B. Defective

Troubleshooting steps for a defective Main P.C.B.

When ATAPI device is defective

ACDR2 Check

Starting the P.C.B. Test Mode

Steps to enter the P.C.B. test mode for diagnostics.

Mode 1 Operation Check

Procedure for checking analog signal input/output in Mode 1.

Mode 2 Operation Check

Mode 3 Operation Check

Procedure for checking digital coaxial input and analog output in Mode 3.

INSPECTIONS

UPDATING FIRMWARE

Confirmation of Firmware Versions

Steps to check the current system and drive firmware versions.

Firmware Update Procedures

Detailed steps for updating system and drive firmware using a CD-R.

UPDATING FIRMWARE (Continued)

Firmware Update Procedures (Continued)

Completes firmware update procedures, including version confirmation and retries.

FORMATTING THE HDD

Procedure for formatting a new or used HDD before installation.

ENTERING ID TO MAIN P.C.B.

Installing Jig

Instructions for setting up the jig for writing ID to the Main P.C.B.

ENTERING ID TO MAIN P.C.B. (Continued)

Operation Procedure

Steps for entering the serial number and model name via the jig.

ID Check Procedure

Procedure to verify the written ID and model name.

IC DATA

IC DATA (Continued)

BLOCK DIAGRAM

SCHEMATIC DIAGRAM (MAIN 1/2)

SCHEMATIC DIAGRAM (MAIN 2/2)

SCHEMATIC DIAGRAM (OPERATION 1/2)

SCHEMATIC DIAGRAM (OPERATION 2/2)

SCHEMATIC DIAGRAM (OSD)

SCHEMATIC DIAGRAM (WCLK)

P.C.B. MAIN

P.C.B. MAIN & P.C.B. OPERATION

P.C.B. OPERATION

P.C.B. OPERATION (Continued)

P.C.B. OPERATION & P.C.B. OSD & P.C.B. WCLK

EXPLODED VIEW

Related product manuals