Yamaha CRX-E500 - Page 21

CDC-E500
CDC-E500
21
A
Tracking balance ADJ (only OPEN/CLOSE)
Focus gain ADJ
Tracking gain ADJ
~ TOC read ~
After searching the beginning, MUTE is cancelled.
Track No. “1” is searched
~ PLAY ~
MUTE ON
Track search
After searching the beginning, MUTE is cancelled.
~ PLAY ~
MUTE ON
Spindle motor stop
Laser OFF
Forced feed return
~ STOP ~
Stop by STOP key
Search by means of , key
/MUTE = “H” → “L”
/MUTE = “L” → “H” (IC201, 71 pin)
“0:00” appears on the display.
/FLSW = “L” → “H” (IC201, 23 pin)
/MUTE = “L” → “H”
“0:00” appears on the display.