18
Controls and Connectors
01X Owner’s Manual
Before Using Basics Section AppendixGetting Started Reference
!6 [REMOTE] button
This button selects the Remote mode, enabling you to con-
trol DAW (digital audio workstation) software on a con-
nected computer (page 23). In this condition, the MIXER/
LAYER buttons (page 19) function according to their
upper names ([AUDIO], [INST], [MIDI], [BUS/AUX],
[OTHER]).
!7 [INTERNAL] button
This button selects the Internal mode, enabling normal
internal operation of the 01X (pages 37, 85). In this condi-
tion, the MIXER/LAYER buttons (page 19) function
according to their lower names.
!8 [SCENE] button
This button selects the Scene mode, enabling you to store
and recall Scenes (page 85).
!9 [UTILITY] button
This button selects the UTILITY mode, enabling you to set
the global settings for the entire system (page 86). Press-
ing [UTILITY] from any of the Utility pages automatically
calls up the Menu Select display (page 87).
@0 [MONITOR A/B] button
This indicates (and can be used to set) the balance between
the levels of the stereo output of the internal mixer and the
stereo output from the DAW software to the monitor out/
headphones. Pressing the switch alternates between the
two settings: A (lamp is lit) and B (lamp is off). The set-
ting can be changed by holding the [MONITOR A/B] but-
ton and turning the appropriate knob ([5] or [7]).
MODE
!6
@1
@3
@8
#0 #1
@9
#2
#4
#3
#5
#6
@4 @5 @6 @7
@2
!7 !8 !9 @0
To Next Page
Loading...
Need help?
General
