Yamaha DIGITAL MIXING STUDIO 01X User Manual

01X Owner’s Manual
Function Tree/Function List
87
Before UsingBasics SectionAppendix Getting StartedReference
MENU SELECT [UTILITY] (or [UTILITY] in Utility mode)
z
REMOTE
Pressing this jumps to the first page of the Remote Control menu (see below).
No
x PATCH
Pressing this jumps to the first page of the Patch menu (page 88).
No
c W.CLK (Wordclock)
Pressing this jumps to the first page of the Wordclock menu (page 92).
No
v DIO (Digital In/Out)
Pressing this jumps to the first page of the Digital In/Out menu (page 93).
No
b OSC (Oscillator)
Pressing this jumps to the first page of the Oscillator menu (page 93).
No
n MIDI
Pressing this jumps to the first page of the MIDI menu (page 94).
No
m PREFER (Preference)
Pressing this jumps to the first page of the Preference menu (page 95).
No
, MON (Monitor)
Pressing this jumps to the page of the Monitor menu (page 96).
No
REMOTE [UTILITY] → Channel knob 1
1 REMOTE SELECT
z
GENERAL
Selects the Yamaha sequencer software SQ01 for remote control.
Ye s 104
x LOGIC
Selects the sequencer software Logic for remote control.
Ye s 106
c CUBASE
Selects the sequencer software Cubase/Nuendo for remote control.
Ye s 108
v SONAR
Selects the sequencer software SONAR for remote control.
Ye s 110
b DP (Digital Performer)
Selects the sequencer software Digital Performer for remote control.
Ye s 112
2 SHIFT + REMOTE FUNCTION
x
/ c GENERAL REMOTE
The 01X lets you maintain Remote Control over a selected sequencer over
mLAN Port 1, yet still be able to switch to General Remote mode for control-
ling Yamaha software (such as the SQ01 and the Multi Part Editor) over
mLAN MIDI Port 5. To switch to General Remote control, hold down
[SHIFT] and press the [REMOTE] button (the lamp flashes). To return to nor-
mal Remote Control, press the [REMOTE] button again (the lamp stays lit).
If you wish to enable selection of Scenes via program change messages (see
“Program Change Assign Table” on page 94), use knob 4 or 5 in this page to
turn the “NO ASSIGN” setting on. To turn on GENERAL REMOTE, use
knob 2 or 3.
Ye s
v / b NO ASSIGN Ye s 9 4
Knob
Function name/
settings
Explanation Prompt
Related
pages
Block
diagram
[PAGE SHIFT] + DISPLAY [ / ]

Yamaha DIGITAL MIXING STUDIO 01X Specifications

General

Brand	Yamaha
Model	DIGITAL MIXING STUDIO 01X
Category	Music Mixer
Language	English