EasyManua.ls Logo

Yamaha DTX-MULTI - Chorus Send page; Reverb Send page; Pattern Quantization & Management; Quantize Pattern page

Yamaha DTX-MULTI
116 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
78 Owner’s Manual
PATTERN Setting Area (PTN)
1 MIDI channel (Ch)
B Chorus send level (ChoSend)
Use this parameter to set the chorus-send level to be sent by
the currently selected pattern.
If “off or “PC” has been selected on the MIDI Transmit page (PTN3-1),
this setting will be displayed as “---” and modification will not be possi-
ble.
If you change the chorus send level for MIDI channel 10, the setting on
the Chorus Send page (KIT3-1) for the currently selected kit will also
change to this new setting.
1 MIDI channel (Ch)
B Reverb send level (RevSend)
Use this parameter to set the reverb-send level to be sent by
the currently selected pattern.
If “off or “PC” has been selected on the MIDI Transmit page (PTN3-1),
this setting will be displayed as “---” and modification will not be possi-
ble.
If you change the reverb send level for MIDI channel 10, the setting on
the Reverb Send page (KIT3-2) for the currently selected kit will also
change to this new setting.
Pattern Quantization & Management
In the JOB section, you can quantize the currently selected User
pattern, import SMF files, and perform other related tasks. With
the JOB page (PTN4) displayed, press the [ENTER] button to
access its seven parameter-setting pages (PTN4-1 to PTN4-7).
You can use the [
B
]/[
C
] buttons to navigate between these
pages.
This section can be used only with User patterns. If a Preset pattern has
been selected, the [ENTER] button will not open a parameter-setting page.
From the Quantize Pattern page, you can correct irregularities in
the timing of notes making up the currently selected User pattern.
This is referred to as quantizing. With the Quantize page dis-
played, press the [ENTER] button to open the Quantize Pattern
Setting page.
PTN4-1-1 Quantize Pattern Setting page
1 Quantize
Use this parameter to specify the quantizing resolution as a
division of a whole note. The lower the resolution, the finer
the correction of timing.
PTN3-6 Chorus Send page
Settings 1 to 16
Settings 0 to 127
PTN3-7 Reverb Send page
Settings 1 to 16
Settings 0 to 127
PTN3-6≥≥≥≥≥≥Ch≥1
≥≥ChoSend=≥≥0
1
2
NOTE
PTN3-7≥≥≥≥≥≥Ch≥1
≥≥RevSend=≥40
1
2
NOTE
PTN4 JOB
PTN4-1 Quantize Pattern page
Settings
When time signature from PTN1 or for
recording is 3/8, 6/8, 9/8, 12/8, or 15/8:
16 note triplets
16 notes
8 note triplets
8 notes
4 notes
Dotted 4 notes
When time signature from PTN1 is other
than the above:
16 note triplets
16 notes
8 note triplets
8 notes
4 note triplets
4 notes
The natural groove of a recorded performance may be lost as a
result of quantization. Note that once a pattern is quantized, it will
not be possible to reverse the procedure.
PTN4
≥≥≥≥≥≥JOB
NOTE
PTN4-1≥≥≥≥≥<JOB>
≥≥≥≥Quantize
PTN4-1-1
≥≥Quantize=ƒ
1
˙3
th
˙
th
©3
th
©
th
ƒ
th
¨
th
˙3
th
˙
th
©3
th
©
th
ƒ3
th
ƒ
th
CAUTION

Table of Contents

Other manuals for Yamaha DTX-MULTI

Related product manuals