Yamaha DTX400K - Setting Parameters using Menu Mode; Metronome Settings: Pattern; Metronome Settings: Beats; Metronome Settings: Sound

Setting Parameters using Menu Mode
DTX400K/DTX430K/DTX450K Owner’s Manual
41
1-1. Pattern
Using the following procedure, you can set one of eight pat-
terns for the drum module’s metronome.
1. While holding the [KIT] button, press the [SONG] but-
ton to activate Menu Mode.
2. Press number button [1] to select the Metronome Set-
tings parameter group.
3. Press number button [1] to select the Pattern parameter.
4. Select a new metronome pattern using the correspond-
ing number button ([1] to [8]). The available settings are
as follows.
1-2. Beats
Using the following procedure, you can set the metronome
to between 1 and 9 beats in length.
1. While holding the [KIT] button, press the [SONG] but-
ton to activate Menu Mode.
2. Press number button [1] to select the Metronome Set-
tings parameter group.
3. Press number button [2] to select the Beats parameter.
4. Select a new metronome length in beats using the corre-
sponding number button ([1] to [9]). The available set-
tings are as follows.
1-3. Sound
Using the following procedure, you can set the sound
played by the metronome to, for example, a standard click
sound, a cowbell, a drumsticks sound, or a spoken count.
1. While holding the [KIT] button, press the [SONG] but-
ton to activate Menu Mode.
2. Press number button [1] to select the Metronome Set-
tings parameter group.
3. Press number button [3] to select the Sound parameter.
4. Select a new metronome sound using the corresponding
number button ([1] to [6]). The available settings are as
follows.
z Metronome Settings
Steps:
MENU ([KIT] + [SONG])  [1]  [1]  Setting
Number
button
Setting
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
With settings [2], [4], [6], and [8], the first beat is accented.
Setting
3 3 3 3
3 3 3 3
NOTE
Steps:
MENU ([KIT] + [SONG])  [1]  [2]  Setting
Number button Setting
[1] 1 beat
[2] 2 beats
[3] 3 beats
[4] 4 beats
[5] 5 beats
[6] 6 beats
[7] 7 beats
[8] 8 beats
[9] 9 beats
Steps:
MENU ([KIT] + [SONG])  [1]  [3]  Setting
Number button Setting
[1] Metronome click 1
[2] Metronome click 2
[3] Cowbell
[4] Drumsticks
[5] Spoken count 1
[6] Spoken count 2
Setting
Setting