IMPORTANT
This manual describes the process of assembling a pad set and drum trigger module to an already
assembled electronic drum rack. Before starting the steps below, therefore, be sure to assemble
your electronic drum rack as described in the Owner’s Manual that came with it.
NOTICE
Lay a drum mat (sold separately) on the floor underneath the hi-hat controller and the kick pad.
Alternatively, you can place cardboard from the drum kit packaging or the like on the floor to
prevent it from being scratched.
Safety Precautions
Please read carefully before proceeding.
The purpose of the precautions detailed below is to ensure that this electronic drum kit can be
used safely without fear of injury or property damage. As a means of indicating the severity and
immediacy of any risk of injury or property damage resulting from incorrect operation, these
precautions are classified as either WARNING or CAUTION. The instructions displayed together
with these precautions are extremely important in terms of ensuring safety, and therefore, they
should be fully observed.
* After reading this Assembly Manual, ensure that it is kept in a safe, convenient location for
future reference.
* Be sure to also read the Assembly Manuals and/or Owner’s Manuals that came with your pads
and rack.
To Next Page
Loading...
