EasyManua.ls Logo

Yamaha DVX-1000 - Page 41

Yamaha DVX-1000
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DVD setup menu options
39 En
ON-SCREEN MENU
5
English
[CHROMA DELAY]
The chroma (color) and luminance (brightness) signals are
not synchronized. You can adjust the advance delay of the
chroma signal to yield a perfectly clear picture. This
function is not available for HDMI output.
You can adjust the value from -3 to +3.
1 Select [ADV PICTURE] in [VIDEO SETUP PAGE].
2 Press / to highlight [CHROMA DELAY],
then press .
3 Press / to select a setting and press ENTER to
confirm.
[WIDE SCREEN FORMAT]
Set the aspect ratio of the projected images on the screen.
This function is only available for progressive scan and
HDMI output.
1 Select [ADV PICTURE] in [VIDEO SETUP PAGE].
2 Press / to highlight [WIDE SCREEN
FORMAT], then press .
NL STRETCH
Select this to display a 4:3 image on the 16:9 screen
with non-linear stretching (center position of screen is
stretched less than the sides).
4:3 PILLAR BOX
Select this to display a 4:3 image on the 16:9 screen
without stretching.
OFF
No aspect ratio adjustment is made when this option is
selected.
3 Press / to select a setting and press ENTER
to confirm.
[HDMI VIDEO]
Set the resolution depending on the monitor you are using.
This function is only available when you connect the
DVD receiver to an HDMI compatible component via the
HDMI terminal.
1 Select [ADV PICTURE] in [VIDEO SETUP PAGE].
2 Press / to highlight [HDMI VIDEO], then
press .
480P
480 progressive-scan video
576P
576 progressive-scan video
720P
720 progressive-scan video
1080I
1080 interlace video
1080P
1080 progressive-scan video
AUTO
The resolution is automatically selected to match the
component you are using.
3 Press / to select a setting and press ENTER
to confirm.
For settings other than [AUTO], HDMI video
signals may not be output properly if a resolution
output setting is not supported by the HDMI
component you are using. In this case, follow the
steps below to change [HDMI VIDEO] to [480P].
If a disc is inserted, press to eject the disc.
Press .
Press AUDIO.
Do not perform this operation while playing back a
disc on the DVD receiver.
Notes

Table of Contents

Other manuals for Yamaha DVX-1000

Related product manuals