4-7
E
EMU00352
Cleaning and Anti-corrosion Measure
1) Wash down the exterior of the outboard
with fresh water and dry off completely.
2) Spray the engine’s exterior with
“Yamaha Silicone Protectant” (Part No.
LUB-SILCNE-13-00).
CAUTION:
@
Do not spray when the engine is running.
Also, do not spray near the silencer and
oxygen sensor cover or into the engine.
Otherwise, the oxygen sensor for Elec-
tronic Fuel Injection system could be
damaged.
@
3) Wax the cowling with a non-abrasive
wax such as “Yamaha Silicone Wax”
(Part No. ACC-11000-15-02).
U69J13.book Page 7 Thursday, March 20, 2003 10:48 AM
To Next Page
Loading...
