4-27
E
6) When the oil begins to flow out of the oil
level plug hole, insert and tighten the oil
level plug.
7) Insert and tighten the oil drain plug.
EMU14622
INSPECTING AND REPLACING
ANODE(S)
Yamaha outboard motors are protected from
corrosion by sacrificial anodes. Inspect the
external anodes periodically. Remove scales
from the surfaces of the anodes. Consult a
Yamaha dealer for replacement of external
anodes.
CAUTION:
@
Do not paint anodes, as this would ren-
der them ineffective.
@
NOTE:
@
Inspect ground leads attached to external
anodes on equipped models. Consult a
Yamaha dealer for inspection and replace-
ment of internal anodes attached to the
power unit.
@
U69J13.book Page 27 Thursday, March 20, 2003 10:48 AM
To Next Page
Loading...
