4-30
E
EMU18470¯
Connecting the Battery
WARNING
@
Mount the battery holder securely in a
dry, well-ventilated, vibration-free loca-
tion in the boat. Install the fully charged
battery in the holder.
@
CAUTION:
@
●
Make sure the main switch (on applica-
ble models) is “OFF” before working
on the battery.
●
Reversal of the battery leads will dam-
age the electrical parts.
●
Connect the RED lead first when
installing the battery and disconnect
the BLACK lead first when removing it.
Otherwise, the electrical parts can be
damaged.
●
The electrical contacts of the battery
and cables must be clean and properly
connected, or the battery will not start
the engine.
@
Connect the RED lead to the POSITIVE (+)
terminal first. Then connect the BLACK lead
to the NEGATIVE (-) terminal.
1
Red lead
2
Black lead
3
Battery
U69J13.book Page 30 Thursday, March 20, 2003 10:48 AM
To Next Page
Loading...
