Installation
40
height. Consult your Yamaha dealer or boat
manufacturer for further information on deter-
mining the proper mounting height.
NOTICE
ECM01634
● Make sure that the idle hole is high
enough to prevent water from entering
the engine even if the boat is stationary
with the maximum load.
● Incorrect engine height or obstructions
to the smooth flow of water (such as the
design or condition of the boat, or ac-
cessories, such as transom ladders or
depth finder transducers) can create air-
borne water spray while the boat is
cruising. If the outboard motor is operat-
ed continuously in the presence of air-
borne water spray, enough water could
enter the engine through the air intake
opening in the top cowling to cause se-
vere engine damage. Remove the cause
of the airborne water spray.
ZMU01762
U6P278E0.book Page 40 Monday, April 11, 2011 7:37 PM
To Next Page
Loading...
