Yamaha F250A - Shallow Water; Power Trim and Tilt Models

Operation
56
F225C
3. Push the power trim and tilt switch “”
(down) to lower the outboard motor to the
desired position.
EMU28062
Shallow water
EMU32871
Power trim and tilt models
The outboard motor can be tilted up partially
to allow operation in shallow water.
NOTICE
ECM01490
● If the engine speed is suddenly in-
creased when the outboard motor is par-
tially tilted up, the power trim and tilt unit
could be damaged.
● Do not tilt the outboard motor up so that
the cooling water inlet on the lower unit
is above the surface of the water when
setting up for and cruising in shallow
water. Otherwise severe damage from
overheating can result.
EMU32922
Procedure for power trim and tilt models
1. Place the remote control lever in neutral.
ZMU06018
DN
ZMU04196
ZMU04603
DN
N
ZMU04588
U6P278E0.book Page 56 Monday, April 11, 2011 7:37 PM