Yamaha F40F - Specifications and Requirements; Engine Specifications; Performance Ratings

9
Specifications and requirements
EMU34522
Specifications
TIP:
“(AL)” stated in the specification data below
represents the numerical value for the alumi-
num propeller installed.
Likewise, “(SUS)” represents the value for
stainless steel propeller installed and “(PL)”
for plastic propeller installed.
EMU2821V
Dimension and weight:
Overall length:
F30BEHD 1362 mm (53.6 in)
F30BET 698 mm (27.5 in)
F40FED 698 mm (27.5 in)
F40FEHD 1362 mm (53.6 in)
F40FET 698 mm (27.5 in)
Overall width:
384 mm (15.1 in)
Overall height S:
F30BET 1228 mm (48.3 in)
F40FEHD 1228 mm (48.3 in)
F40FET 1228 mm (48.3 in)
Overall height L:
1350 mm (53.1 in)
Motor transom height S:
F30BET 414 mm (16.3 in)
F40FEHD 414 mm (16.3 in)
F40FET 414 mm (16.3 in)
Motor transom height L:
536 mm (21.1 in)
Dry weight (AL) S:
F30BET 94 kg (207 lb)
F40FEHD 98 kg (216 lb)
F40FET 94 kg (207 lb)
Dry weight (AL) L:
F30BEHD 102 kg (225 lb)
F30BET 98 kg (216 lb)
F40FED 95 kg (209 lb)
F40FEHD 102 kg (225 lb)
F40FET 98 kg (216 lb)
Performance:
Full throttle operating range:
5000–6000 r/min
Rated power:
F30BEHD 22.1 kW (30 HP)
F30BET 22.1 kW (30 HP)
F40FED 29.4 kW (40 HP)
F40FEHD 29.4 kW (40 HP)
F40FET 29.4 kW (40 HP)
Idle speed (in neutral):
750–850 r/min
Power unit:
Type:
4-stroke SOHC L3 6 valves
Total displacement:
747 cm
3
(45.6 c.i.)
Bore  stroke:
65.0  75.0 mm (2.56  2.95 in)
Ignition system:
CDI
Spark plug (NGK):
DPR6EB-9
Spark plug gap:
0.8–0.9 mm (0.031–0.035 in)
Steering system:
F30BEHD Tiller handle
F30BET Remote steering
F40FED Remote steering
F40FEHD Tiller handle
F40FET Remote steering
Starting system:
Electric starter
Starting carburetion system:
Fuel injection
Valve clearance IN (cold engine):
0.15–0.25 mm (0.0059–0.0098 in)
Valve clearance EX (cold engine):
0.25–0.35 mm (0.0098–0.0138 in)
Battery rating (CCA/EN):
430–1080 A
6BG-9-78-1E0.book 9 ページ ２０１４年１１月２０日 木曜日 午後３時３分