10-5
1. Operation of all the locks (Ignition, Steering, Fuel Tank Cap, Side Cover L.H.).
2. Fuel Cock Lever Operation and its reserve position; Fuel Tank Capacity including reserve.
3. Operation and function of Starter Lever.
4. Operation of Kick Lever.
5. Operation of Throttle.
6. Operation of Handle Bar Switches, their Functions and Pass Beam.
7. Operation of Starter/Kill Switch & Its functioning.
8. Disadvantages of riding on half Clutch (Never ride with clutch pressed).
9. Gear shifting pattern.
10. Tyre inflation pressure : Front - 25 Psi Rear - 32 Psi (Solo), 32 Psi (Double)
11. Never give sudden acceleration; always accelerate gradually
12. Simultaneous use of Front and Rear Brakes.
13. Checking of Brake Fluid at regular intervals
14. Never ride with your foot on Rear brake Pedal.
15. Whenever parking the Motorcycle on the Side Stand, ensure that the Fuel Cock Lever is in closed
position.
16. Always adjust both the right and left Shock Absorbers to the same position.
INSTALLATION
Procedures to be explained to the customer on delivery of the Motorcycle by the Dealer's
Representative.
SERVICE2.PMD 10/1/2005, 12:57 PM5
To Next Page
Loading...
Need help?
General
