Basic components
29
Stop the engine immediately if the buzzer
sounds and the overheat warning device has
activated. Check the cooling water inlet for
clogging.
CAUTION:
ECM01591
● Do not continue to run the engine if the
overheat-warning indicator blinks. Seri-
ous engine damage will occur.
● Do not continue to operate the engine if
a warning device has activated. Consult
your Yamaha dealer if the problem can-
not be located and corrected.
Water separator warning
This indicator will blink when water has accu-
mulated in the water separator (fuel filter)
while cruising. In such an event, stop the en-
gine immediately and see page 73 of this
manual to drain the water from the fuel filter.
Get back to the port soon and consult a
Yamaha dealer immediately.
CAUTION:
ECM00910
Gasoline mixed with water could cause
damage to the engine.
Engine trouble warning
This indicator will blink when the engine mal-
functions while cruising. Get back to the port
soon and consult a Yamaha dealer immedi-
ately.
ZMU05422
ZMU05423
ZMU05424
ZMU05425
ZMU05426
U6P272E0.book Page 29 Friday, March 16, 2007 1:22 PM