Need help?Do you have a question about the Yamaha FZ09E 2014 and is the answer not in the manual?
General| Year | 2014 |
|---|---|
| Manufacturer | Yamaha |
| Model | FZ09E |
| Category | Motorcycle |
| Bore x Stroke | 78.0mm x 59.1mm |
| Compression Ratio | 11.5:1 |
| Fuel System | Fuel Injection |
| Transmission | 6-speed |
| Final Drive | Chain |
| Front Tire | 120/70 ZR17 |
| Rear Tire | 180/55 ZR17 |
| Wheelbase | 1, 440 mm |
| Seat Height | 815 mm |
| Ground Clearance | 135 mm |
| Engine Type | Liquid-cooled, in-line 3-cylinder |
| Ignition | TCI |
| Front Suspension | 41 mm upside-down fork |
| Rear Suspension | Swingarm |
| Front Brake | Dual 298 mm discs |
| Rear Brake | 245 mm disc |
| Fuel Capacity | 14 L |
| Power | 115 hp |
| Torque | 87.5 Nm |
Detailed technical data for the engine, including bore, stroke, and fluid capacities.
Technical data related to the motorcycle's chassis, wheels, tires, and brakes.
Details on the motorcycle's electrical system components, voltage, and capacity.
Specifications for fastener tightening torques for engine and chassis components.
Procedure for checking and adjusting engine valve clearance on a cold engine.
Step-by-step procedure for draining and refilling the engine oil.
Detailed steps for removing, disassembling, checking, and assembling the front wheel.
Procedures for removing, disassembling, checking, and installing the rear wheel.
Information on removing, disassembling, and checking front brake components.
Procedures for removing, disassembling, and checking rear brake components.
Steps for removing, checking, and installing the steering head components.
Guidance on handling, removing, checking, and installing the rear shock absorber.
Procedures for removing, checking, and installing the motorcycle's swingarm.
Detailed steps for removing the engine, including disconnecting leads and hoses.
Detailed steps for removing, checking, and installing clutch components.
Steps for removing, disassembling, checking, and assembling the transmission.
Circuit diagrams, ECU self-diagnostics, and troubleshooting for the FI system.
Diagnosing and resolving issues related to reduced braking performance.
To Next Page