Yamaha FZ09E 2014 - Adjusting the Headlight Beam

PERIODIC MAINTENANCE
3-30
6. Install:
• Headlight bulb
Secure the new headlight bulb with the head-
light bulb holder.
NOTICE
ECA13690
Avoid touching the glass part of the head-
light bulb to keep it free from oil, otherwise
the transparency of the glass, the life of the
bulb and the luminous flux will be adversely
affected. If the headlight bulb gets soiled,
thoroughly clean it with a cloth moistened
with alcohol or lacquer thinner.
7. Hook:
• Headlight bulb holder
8. Install:
• Headlight bulb cover
9. Connect:
• Headlight coupler “1”
10.Install:
• Headlight unit “1”
TIP
Install the headlight unit as shown.
11.Install:
• Headlight unit side cover bolts
EAS21810
ADJUSTING THE HEADLIGHT BEAM
1. Adjust:
• Headlight beam (vertically)
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Turn the adjusting screw “1” in direction “a” or
“b”.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
2. Adjust:
• Headlight beam (horizontally)
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
TIP
To adjust the headlight beam (horizontally), in-
sert a crosshead screwdriver into the hole “a”
and turn the adjusting screw.
a. Turn the adjusting screw “1” in direction “b” or
“c”.
Headlight unit side cover bolt
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
New
1
1
T
R
.
.
Direction “a”
Headlight beam is raised.
Direction “b”
Headlight beam is lowered.
Direction “b”
Headlight beam moves to the right.
Direction “c”
Headlight beam moves to the left.
1
a
b
a