Need help?Do you have a question about the Yamaha G10 and is the answer not in the manual?
General| Velocity Sensitivity | Yes |
|---|---|
| Type | MIDI Controller |
| Controllers | Pitch Bend, Modulation |
| Outputs | MIDI |
| Power Source | 9V DC |
Explains caution symbols for electrical shock and important instructions.
Highlights the G10 as a new instrument for MIDI sound control and its technology.
Details the G10C's internal memories, programmable parameters, and TX802/TX81Z voice compatibility.
Covers avoiding heat, humidity, shock, proper handling, cleaning, power, and interference.
Identifies and describes parts like the controller arm, volume wheel, and sensors.
Details output connector, strap pins, string locks, sensors, and tensioners.
Explains buttons, display, and input connectors on the G10C front.
Describes foot control, MIDI, and other rear panel connections.
Guides through installing the arm, setting string tension, and making system connections.
Covers turning on the system and using velocity peak to set gain controls.
Instructions for TX802/TX81Z setup, multi-channel reception, and mono mode.
How to choose internal or cartridge performance memory groups.
Steps for choosing specific memory locations via buttons or footswitches.
Step-by-step guide to editing parameters using the G10C interface.
Details on editing program number, transmit channel, volume, and open tuning.
Explains trigger mode, capo, legato effects, and velocity curve assignment.
Covers sensitivity, muting, performance naming, and function assignments.
Instructions for storing changes to internal or cartridge memory locations.
Explains common error messages encountered during the store operation.
Covers memory protect, initialize, and recall operations.
Procedures for formatting, loading, saving, and transmitting data via cartridges.
Configuration for receive channel, velocity curves, bend curves, and global channels.
How to set up TX802/TX81Z tone generators with the G10C.
Explains creating and editing chains of performance memory locations.
Step-by-step guide to programming chain steps and memory locations.
Guidance on when to change strings and how to remove old ones.
Procedures for string installation, truss rod, and sensor height adjustments.
Examples of connecting the G10/G10C for live performance with amps and effects.
Examples of integrating the G10/G10C into MIDI recording studios.
Basics of MIDI, data bytes, and message categories.
Explains MIDI messages, data formats, and potential received messages.
Technical details about the G10 guitar controller.
Technical details about the G10C MIDI converter.
Comprehensive safety guidelines for using the product.
Information on RFI, warranty, static electricity, and FCC compliance.
Details on how the G10C sends and receives MIDI data.
Explains MIDI channel and system exclusive message structures.
Specific formats for various data dumps like voice, performance, and setup.
Chart detailing MIDI functions transmitted and recognized by the G10C.
A template for recording G10 performance parameters.
A template for recording G10C chain sequence data.
To Next Page
