Need help?Do you have a question about the Yamaha HTR-5930 and is the answer not in the manual?
General| Channels | 5.1 |
|---|---|
| Audio Formats | Dolby Digital, DTS, Dolby Pro Logic II |
| FM/AM Tuner | Yes |
| Response Bandwidth | 10 Hz - 100 kHz |
| Signal-To-Noise Ratio | 100 dB |
| Total Harmonic Distortion | 0.9% |
| Input Sensitivity | 200 mV |
| Audio D/A Converter | 24-bit/192 kHz |
| Surround System Class | 5.1 channel |
| Digital Sound Processor (DSP) | Yes |
| DSP Preset Qty | 14 |
| Tuner Bands | AM/FM |
| Preset Station Qty | 40 |
| Power Output | 100 Watts |
| Inputs | 4 x AV, 3 x Audio, 2 x Component Video, 3 x Optical, 1 x Coaxial |
| Outputs | 1 x AV, 1 x Component Video, 1 x Headphones |
| Input Impedance | 47 kΩ |
| Built-in Decoders | DTS decoder, Dolby Digital, Dolby Pro Logic II |
| Tuning Display | Fluorescent |
| Connector Type | Optical, Coaxial, S-Video |
| Weight | 17.6 lbs |
| Surround Sound Effects | CINEMA DSP |
Explains symbols used in the manual for safety warnings and instructions.
Covers essential safety guidelines for operating the unit to prevent hazards.
Procedures for handling damage, replacement parts, and post-service safety checks.
Guidelines for safe mounting, heat prevention, and outdoor antenna grounding.
Compliance statements and troubleshooting for potential radio frequency interference.
Essential guidelines for proper and safe operation of the unit.
Details on power amplifier, decoders, DSP, and signal processing capabilities.
Describes AM/FM tuner and XM Satellite Radio capabilities.
Lists other functionalities like D/A converter, input jacks, and special modes.
Lists all the items included in the package with the unit.
Step-by-step instructions on how to insert batteries into the remote control.
Identifies and describes the controls and indicators on the unit's front panel and display.
Explains functions for headphones, speakers, tone control, input modes, and source selection.
Details the functions of various buttons on the remote control for operating the unit.
Explains functions for mute, night mode, tuner operation, and preset selection.
Indicators for decoders, input sources, and XM status.
Indicators for memory, mute, volume, sleep, and tuning modes.
Identifies various input and output jacks for audio, video, and antennas.
Details speaker terminals and the impedance selector.
Recommended placement for front, center, and surround speakers for optimal sound.
Instructions for connecting speaker wires to front, center, and surround terminals.
Connecting front, center, surround speakers and the subwoofer output.
Explains different types of audio and video jacks and cable plugs.
Guides on connecting video monitors and source components like DVD players and VCRs.
Connecting high-quality video and discrete multi-channel audio sources.
Guides for connecting CD players and recorders for audio playback.
Instructions for connecting FM and AM antennas, including the loop antenna.
Steps for connecting the power cable and turning the unit on.
A quick setup guide for configuring the system with minimal effort, including room size.
Steps to configure speakers and use test tones for level adjustments.
Fine-tuning speaker balance for front, center, surround, and subwoofer.
Choosing input modes and adjusting speaker output levels during playback.
Setting speaker levels using a test tone for balanced output.
Displaying input source details and selecting sound field programs.
Using headphones with SILENT CINEMA, muting, night mode, and multi-channel inputs.
How to select sound field programs using front panel or remote controls.
Detailed descriptions of various sound field programs and their features.
Playing 2-channel sources and customizing sound field parameters.
Creating virtual surround effects and listening to unprocessed input signals.
Performing recording tasks and adjustments from source components.
Instructions for automatic tuning and storing FM stations.
Instructions for manually tuning to FM/AM stations for better signal quality.
Detailed steps for automatic preset tuning of FM stations.
Manually storing up to 40 stations into memory.
How to tune into stored stations using preset groups and numbers.
Procedure to swap the assignments of two preset stations.
Introduction to XM service and connecting the digital antenna.
Explains front panel and remote control functions for XM Satellite Radio.
Steps to sign up for and activate XM Satellite Radio service.
General steps for operating XM Satellite Radio, including source selection and info display.
How to search for channels using All Channel, Category, or Preset modes.
Detailed steps for searching for channels within specific categories.
How to search using presets and enter channel numbers directly.
Detailed steps for entering channel numbers directly for XM channels.
How to store desired XM channels into memory.
How to view channel number, category, or artist/song title for XM channels.
How to view channel number, category, or artist/song title for XM channels.
Overview of BASIC, SOUND, INPUT, and OPTION menus for system customization.
Navigating menus and configuring speaker size, crossover, and placement.
Adjusting speaker delay, LFE levels, and bass output routing.
Configuring dynamic range, tone bypass, and input jack assignments.
Adjusting display brightness, memory guard, audio mute, and XM radio settings.
Instructions for using the remote to operate the AV receiver and a TV.
Using the remote control to operate other audio/video components.
Procedures for setting remote control codes for various input sources.
Troubleshooting common issues like unit not turning on or no sound.
Resolving problems like sound cutting off, one-sided sound, or no sound from specific speakers.
Troubleshooting playback errors, humming, recording issues, and unit operation.
Solutions for tuner reception issues and XM Satellite Radio status messages.
Solutions for remote control issues related to distance, angle, and battery.
Steps to reset all unit parameters to factory default settings.
Explanations of audio technologies like Dolby Digital, Pro Logic II, and Surround.
Explanations of sound field programs and video signal types.
Details on audio, FM, AM, and general technical specifications of the unit.
Explanations of DTS, ITU-R, LFE, and PCM audio formats.
Details on sound field programs and video signal types.
Details on audio, FM, AM, and general technical specifications of the unit.
Lists of remote control codes for TV, VCR, DVD, MD, CD players, and recorders.
To Next Page
