EasyManua.ls Logo

Yamaha HTR-6060 - Service Manual

Yamaha HTR-6060
137 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SERVICE MANUAL
101042
IMPORTANT NOTICE
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already
known and understood by the users, and have therefore not been restated.
WARNING: Failure to follow appropriate service and safety procedures when servicing this product may result in personal
injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons,
we advise all YAMAHA product owners that any service required should be performed by an authorized
YAMAHA Retailer or the appointed service representative.
IMPORTANT: The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and
service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable
and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please
contact the distributor's Service Division.
WARNING: Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
IMPORTANT: Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.
CONTENTS
TO SERVICE PERSONNEL .......................................... 2
FRONT PANELS ........................................................ 3–4
REAR PANELS .......................................................... 5–8
REMOTE CONTROL PANELS ...................................... 9
SPECIFICATIONS / 参考仕様 ................................ 10–12
INTERNAL VIEW ......................................................... 13
DISASSEMBLY PROCEDURES / 分解手順.......... 14–17
UPDATING FIRMWARE/
ファームウェアの書き込み..................................... 18–25
SELF DIAGNOSIS FUNCTION (DIAG)/
自己診断機能(ダイアグ)..................................... 26–52
AMP ADJUSTMENT/アンプ部調整 ........................... 53
DISPLAY DATA ..................................................... 54–55
IC DATA ................................................................. 56–70
BLOCK DIAGRAMS .............................................. 71–75
PRINTED CIRCUIT BOARDS................................ 76–88
PIN CONNECTION DIAGRAMS ............................ 89–91
SCHEMATIC DIAGRAMS .................................... 93–101
REPLACEMENT PARTS LIST .......................... 103–129
REMOTE CONTROL.......................................... 130–133
ADVANCED SETUP / 本機の設を変更す .... 134–136
SCENE CONTROL ..................................................... 137
AV RECEIVER/AV AMPLIFIER
RX-V661/HTR-6060/DSP-AX761
P.O.Box 1, Hamamatsu, Japan
RX-V661/HTR-6060/
DSP-AX761
2007 All rights reserved.
This manual is copyrighted by YAMAHA and may not be copied or
redistributed either in print or electronically without permission.
'07.03

Table of Contents

Other manuals for Yamaha HTR-6060

Questions and Answers

  • M
    Michael SteeleAug 19, 2025
    Why does my Yamaha Receiver fail to turn on?
    • Z
      Zachary BoltonAug 19, 2025
      If your Yamaha Receiver fails to turn on or enters standby mode shortly after being powered on, it could be due to several reasons. Ensure the power cable is firmly connected. An incorrect speaker impedance setting can also cause this, so set it to match your speakers. The protection circuitry might have been activated; in this case, check all speaker wire connections to ensure they are secure and not touching anything other than their respective connections. Finally, if the unit experienced a strong external electric shock, set it to standby mode, disconnect the power cable, plug it back in after 30 seconds, and then try using it normally.
  • M
    mollyphillipsAug 21, 2025
    Why is there no sound coming from my Yamaha HTR-6060?
    • J
      Jaclyn MorenoAug 21, 2025
      If you're not hearing any sound from your Yamaha Receiver, there could be several reasons. First, check all input and output cable connections to ensure they are properly connected; if the problem continues, the cables may be defective. Make sure the optimizer microphone is disconnected. The audio input jack select should be set to “AUTO”. Ensure you've selected the correct input source using the INPUT selector on the front panel or remote control. Also, confirm that the front speakers are correctly selected by pressing [1]SPEAKERS on the front panel. Check that the volume isn't turned down or muted; if muted, press [L]MUTE or [J]VOLUME +/– on the remote to resume audio output and adjust the volume.
  • L
    Lori WebbAug 23, 2025
    What to do if the sound suddenly goes off on my Yamaha Receiver?
    • S
      Sheila WrightAug 23, 2025
      If the sound from your Yamaha Receiver suddenly goes off, it might be due to a few reasons. The protection circuitry could have been activated due to a short circuit, so check that the speaker impedance setting is correct. Alternatively, the sleep timer might have turned the unit off; if so, turn the unit back on and restart the source. Lastly, the sound could be muted, so press [L]MUTE or [J]VOLUME +/– on the remote control to resume audio output.
  • B
    Brooke Greene MDAug 26, 2025
    How to fix no sound from surround speakers on Yamaha HTR-6060 Receiver?
    • A
      Allison SheppardAug 26, 2025
      If you're not hearing sound from the surround speakers on your Yamaha Receiver, first ensure that “EXTRA SP ASSIGN” is set to “PRESENCE”. Next, verify that “SUR. L/R SP” in “SET MENU” is set to either “SML” or “LRG”. If the unit is in “STRAIGHT” mode and playing a monaural source, press [D]STRAIGHT on the front panel to disable “STRAIGHT” mode. Lastly, check that “SUR. B L/R SP” in “SET MENU” is set to a setting other than “NONE”.
  • M
    Morgan JonesAug 28, 2025
    Why is there no sound from the center speaker on my Yamaha Receiver?
    • M
      mossashleyAug 28, 2025
      If you're not getting any sound from the center speaker of your Yamaha Receiver, start by checking the cable connections to ensure they are correct; if the issue persists, the cables may be defective. Also, verify the “SPEAKER LEVEL” settings are properly adjusted. If “CENTER SP” in “SET MENU” is set to “NONE”, change it to “SML” or “LRG”. Finally, if one of the HiFi DSP programs (except for “7ch Stereo”) is selected, try using another sound field program.
  • C
    Christopher JuarezAug 30, 2025
    Why no sound from presence speakers Yamaha HTR-6060 Receiver?
    • T
      trevinostephenAug 30, 2025
      If you are not hearing sound from the presence speakers on your Yamaha Receiver, make sure that the sound field programs are turned on by pressing [D]STRAIGHT. If that doesn't solve the issue, you may be using a source or program combination that doesn't output sound from all channels; try another sound field program.
  • J
    Jim WhiteSep 2, 2025
    How to troubleshoot no sound from HDMI on Yamaha HTR-6060?
    • M
      marilynmccallSep 2, 2025
      If you are not hearing any sound from the connected HDMI component on your Yamaha Receiver, it may be because the HDMI component does not accept multi-channel audio signals. Connect the multi-channel audio signals to the channel audio signals at the source component, such as a DVD player.
  • S
    Sheila KimSep 3, 2025
    How to stop a humming sound from Yamaha Receiver?
    • J
      Jason TaylorSep 4, 2025
      If you're experiencing a humming sound with your Yamaha Receiver, it's likely due to incorrect cable connections. Ensure that all audio cables are firmly connected. If the humming persists, the cables may be defective.
  • D
    Darren FosterSep 6, 2025
    Why can't I play Dolby Digital on my Yamaha Receiver?
    • S
      Samuel RivasSep 6, 2025
      If you cannot play Dolby Digital or DTS sources on your Yamaha Receiver and the Dolby Digital or DTS indicator isn't lighting up, it could be due to a few reasons. First, ensure that the connected component is set to output Dolby Digital or DTS digital signals by checking its operating instructions. Also, verify that the Audio input jack select is set to “AUTO”.
  • D
    daisy54Sep 8, 2025
    Why is the volume low when playing a record on Yamaha HTR-6060 Receiver?
    • M
      Mary FergusonSep 8, 2025
      If the volume level is low when playing a record on your Yamaha Receiver, ensure that the grounding cable of your turntable is connected to the GND terminal of the unit. If you are using a turntable with an MC cartridge, connect it through an MC head amplifier.

Yamaha HTR-6060 Specifications

General IconGeneral
Audio Channels7.1
HDMI Inputs2
HDMI Outputs1
Dolby AtmosNo
DTS:XNo
Built-in BluetoothNo
Wi-FiNo
Response Bandwidth10Hz-100kHz
Signal-To-Noise Ratio100 dB
Input Impedance47 kOhms
Input Sensitivity200 mV
Tuner Presets40
Digital Audio Inputs2 Optical, 1 Coaxial
Digital Audio Output1 Optical
Weight24.7 lbs (11.2 kg)
THD0.06%
Frequency Response10Hz - 100kHz
Surround SoundDolby Digital, DTS
Dimensions (W x H x D)435 x 173 x 389 mm
Streaming ServicesNo

Related product manuals