Need help?Do you have a question about the Yamaha HTR-6295 and is the answer not in the manual?
General| Channels | 7.2 |
|---|---|
| Frequency Response | 10 Hz - 100 kHz |
| Response Bandwidth | 10 Hz - 100 kHz |
| Signal-To-Noise Ratio | 100 dB |
| Input Impedance | 47 kΩ |
| Audio D/A Converter | 192kHz/24-bit |
| Tuner Presets | 40 |
| Surround Sound | Yes |
| Bluetooth | No |
| Wi-Fi | No |
| Inputs | Digital optical, Digital coaxial, Analog audio |
| Outputs | HDMI |
| HDMI | Yes |
| Input Sensitivity | 200 mV |
| Surround Sound Effects | Dolby Digital, DTS |
| DSP Presets | 17 |
| Output Impedance / Channel | 8 Ω |
| Video Inputs/Outputs | HDMI |
| Audio Inputs/Outputs | Analog audio, digital coaxial, digital optical, HDMI |
| Dimensions (W x H x D) | 435 mm |
Explains symbols used for safety warnings in the manual.
Covers installation and general usage safety guidelines, including warnings.
Details FCC compliance requirements and potential modifications to the unit.
Provides detailed instructions for safe and optimal unit operation.
Offers essential guidance on using and maintaining remote controls and batteries.
Itemizes all components supplied with the AV receiver for setup.
Details the functions of each button on the main remote control.
Introduces the remote control, including battery installation and operation range.
Lists necessary items and preparatory steps before setting up the unit.
Guides on placing and connecting speakers for optimal sound experience.
Instructions for connecting external audio and video devices to the unit.
Details on connecting the power cable and turning the unit on.
Guidance on selecting an input source and initiating playback.
Recommends speaker layouts and describes the function of each speaker channel.
Guides on connecting video monitors via HDMI or other video inputs.
Details how to connect various external components like players and set-top boxes.
Guides on connecting the unit to a network for Internet Radio and PC music.
Provides a table and illustration for connecting speakers to various terminals.
Instructions for connecting USB memory devices or portable audio players.
Details connecting iPod docks or Bluetooth receivers to the DOCK terminal.
Guides for optimizing speaker performance using the YPAO system.
Guides through the YPAO Auto Setup process for automatic speaker calibration.
Details how to configure speaker settings and select equalizer types.
Explains the steps to initiate the speaker measurement and setup process.
Describes how to interpret the speaker configuration, distance, and level results.
Offers solutions for error messages encountered during the YPAO measurement.
Provides solutions for warning messages that may appear after YPAO measurement.
Step-by-step guide for playing audio and video from connected sources.
Explains how to use the SCENE function to switch inputs and sound fields with one button.
Guide to configuring various settings for each selected input source.
Guides on configuring speaker settings like Auto Setup, Manual Setup, and configuration.
Configuration for HDMI control, standby through, and audio output selection.
Detailed setup for IP address, DHCP, and MAC address filtering for network connectivity.
Introduces the troubleshooting section and general unit issues.
Covers common issues like unit not operating or entering standby mode.
Solutions for issues related to no video signal or incorrect display.
Addresses problems with distorted pictures or lack of audio output.
Solutions for when sound is not heard from individual speakers or the subwoofer.
Solutions for noise, volume distortion, interference, and HDMI connectivity problems.
Common problems related to FM/AM reception, tuning, and static noises.
Solutions for problems encountered with the remote control's functionality.
Interprets status messages for Bluetooth connections and operations.
Solutions for problems with PC server access and Internet Radio playback.
Guides on resolving errors encountered before and during the YPAO Auto Setup.
Provides solutions for errors and warnings that occur after the YPAO Auto Setup process.
Addresses problems with digital audio formats, multi-channel playback, and specific speaker outputs.
Explains status messages related to iPod connection and playback.
Addresses problems with USB device recognition and network connectivity.
Explains status messages and resolves playback issues for USB and PC content.
To Next Page
