Need help?Do you have a question about the Yamaha HTR 6250 - AV Receiver and is the answer not in the manual?
Lists the necessary equipment and components for setting up the system.
Instructions on placing and connecting speakers for optimal sound.
Guidance on connecting external audio and video devices.
Steps to connect the power cable and turn on the unit.
How to select an input source and begin playing audio or video.
Step-by-step instructions for the automatic speaker calibration process.
Basic procedure for playing audio and video sources.
Methods for selecting desired sound field programs via front panel or remote.
Instructions for tuning stations by searching or entering frequency.
How to preset and recall FM/AM radio stations.
Overview of controlling iPod operations via the video display or simple remote mode.
Instructions for pairing Bluetooth devices for wireless audio streaming.
How to connect and play music from a paired Bluetooth device.
Choosing a surround decoder to use with specific sound field programs.
Adjusting sound effect parameters for customized audio.
Configuring speaker parameters like size, distance, and level.
Adjusting dynamic range, lipsync, and HDMI audio settings.
Assigning remote control codes to external components for control.
Lists common problems and their solutions for the unit.
General| Channels | 7.1 |
|---|---|
| Signal-To-Noise Ratio | 100 dB |
| HDMI Switching | Yes |
| Input Sensitivity | 200 mV |
| Tuner Bands | AM/FM |
| Preset Station Qty | 40 |
| Response Bandwidth | 10 - 100000 Hz |
| Input Impedance | 47 kΩ |
| Audio D/A Converter | 24-bit/192 kHz |
| Tuning Range | FM: 87.5 - 108 MHz, AM: 530 - 1710 kHz |
| Connector Type | HDMI |
| Frequency Response | 10 - 100000 Hz |
| Video Section | Composite, S-Video, Component |
| Audio Section | Dolby Digital, Dolby Digital EX, DTS, DTS-ES, DTS 96/24, DTS Neo:6 |
To Next Page