Yamaha MC Series User Manual

Ө Input Mix Level controls
On each channel, eight smooth-operating rotary controls adjust the level of the signal sent to the
master outputs, giving eight independent monitor mixes, Conventionally, the method would be
to “assign” each of the level controls to each of up to eight performers, so that when a musician
asks for a change in his monitors, you know exactly which control to go for. Nominal output
level is obtained with the control at position 8 on the scale.
Q CH ON switch
The CH ON switch turns the channel on (switch DOWN) or off (switch UP) without disturbing |
previously set levels, as it intercepts the signal before the mix level controls (after Insert in/out).
This can be helpful in minimising channel noise during quiet musical passages or when all
channels are not being used.
Ө CUE Switch
The switch allows a single selected input channel or a group of input channels to be monitored
through the operator's headphones or monitor speaker, regardless of whether a master CUE
button is on or off. If more than one CUE switch 15 pressed, the signals from the corresponding
channels are summed and fed to the headphone output. This makes it easy to set EQ or effects
on a channel while other channels are "live", and to locate unwanted noise or hum from
instruments.
Please note that the input CUE LED indicator will light when any input CUE switch is on, as it
has priority over the master CUE switch.
This switch functions whether the CH on switch is on or off.
А
PE
]
CH
INSERT
gu
PHANTOM
IN/OUT
(-10dB!
сәттооко
BES
(4
СН
COMMON)
с
аваа
ЮМ
ess
PEP
PEE
кр
=
nb
Эр
LOZ
о
09
0
9
0
09
0
0
xx
PWG
чачдчиачиа
оо
ла
ЕКЕЕЛТЕШ«І
4-
ос
НІ 2 | -- |
MCIGOBM | CH I-~CH 16
MC2408M | CH I7- CH 24

Yamaha MC Series Specifications

General

Type	Analog
Series	MC
Phantom Power	Yes
Dimensions	Varies depending on the model
Weight	Varies depending on the model
Outputs	Main L/R, Monitor, Aux, etc.