Need help?Do you have a question about the Yamaha MG10/2 and is the answer not in the manual?
General| Type | Analog Mixer |
|---|---|
| Channels | 10 |
| Aux Sends | 1 |
| Stereo Bus | 1 |
| Stereo Returns | 2 |
| Phantom Power | Yes |
| EQ Bands | 3-band |
| Headphone Output | 1 |
| Main Outputs | 2 (XLR and 1/4") |
| Mic Inputs | 4 (XLR / 1/4" combo) |
| Line Inputs | 4 mono + 3 stereo |
Covers warnings and cautions for safe usage and preventing hazards like fire and electrical shock.
Focuses on the importance of the gain control for optimal signal-to-noise ratio and input level.
Outlines the step-by-step procedure for setting input and output levels for best performance.
Explains the use of AUX buses for creating monitor mixes and routing to external effects.
Discusses systematic approaches to mixing, starting with fader levels and source prioritization.
Explains the role of panning in creating stereo width and instrument separation.
Provides guidance on using equalization, emphasizing cutting frequencies over boosting.
Guides users through the necessary steps for connecting and setting up the mixer.
To Next Page
