Why doesn't the alarm sound on my Yamaha mcr-b020 Stereo System?
If the alarm on your Yamaha Stereo System isn't sounding, the unit may be set to ECO standby. In the option menu, set POWER SAVING to NORMAL.
Why do my Yamaha mcr-b020 Stereo System speakers make no sound?
There are several reasons why your Yamaha Stereo System speakers might not be producing sound. First, the volume could be set too low or muted, so try adjusting the volume. Second, the source selected might be incorrect, so ensure you've selected the right one. Also, check that the speakers are securely connected and that headphones are not plugged in. Finally, if you're using an external device, its volume might be too low, so increase its volume.
What to do if my Yamaha Stereo System sound suddenly turns off?
If the sound on your Yamaha Stereo System suddenly turns off, it could be due to the sleep timer being set. In this case, turn the unit on and play the source again. Alternatively, the auto power standby function may have activated. This function turns off the unit automatically after a period of inactivity (either when the time specified for AUTO PWR STDBY in the option menu has elapsed or when 20 minutes have elapsed without any operation being performed after stopping USB device or CD playback).
What to do if the Yamaha Stereo System unit does not operate properly?
If your Yamaha Stereo System unit isn't operating correctly, it may have experienced a strong electrical shock, such as lightning, excessive static electricity, or a drop in power supply. To resolve this, press the reset button on the rear panel of the unit using a fine-tipped stick and restart the unit.
How to fix too much noise on Yamaha Stereo System?
If you are experiencing too much noise, it could be due to an improperly connected antenna. Make sure the antenna is connected properly or consider using a commercially available outdoor antenna. Another cause could be the antenna's proximity to the unit or other electronic devices. Try positioning the antenna as far away as possible from these devices.
Why is radio wave reception weak on my Yamaha Stereo System even with an outdoor antenna?
If, even with an outdoor antenna, radio wave reception is weak on your Yamaha Stereo System (and the sound is distorted), multipath reflection or other radio interferences may be occurring. Try changing the height, direction, or placement of the antenna.
What to do if MP3/WMA file in the USB device does not play on Yamaha Stereo System?
If an MP3/WMA file in your USB device isn't playing on your Yamaha Stereo System, the USB device might not be recognized. Turn the unit off and reconnect the USB device. If that doesn't work, the USB device may not be playable on the unit. Also, ensure that the USB device contains playable files.
Why has the clock setting been cleared on my Yamaha mcr-b020?
If the clock setting on your Yamaha Stereo System has been cleared, it's likely because the unit remained unpowered for about one hour. Plug the power cable into the wall outlet firmly and set the clock again.
Why does my Yamaha mcr-b020 Stereo System display “CD No Disc” or “CD Unknown”?
If the front panel display of your Yamaha Stereo System shows “CD No Disc” or “CD Unknown,” ensure that the disc is compatible with the unit. Also, check the disc for dirt or foreign objects and clean it if necessary. Make sure the disc contains playable files and is inserted with the label facing upward.
Why can’t I establish a Bluetooth connection on my Yamaha mcr-b020?
If you can't establish a Bluetooth connection with your Yamaha Stereo System, it may be because the unit isn't registered on the Bluetooth device's connection list. Try performing the pairing operations again. Also, make sure that BLUETOOTH is set to ON in the unit's option menu.
General| Type | Home audio micro system |
|---|---|
| Cassette deck | No |
| Product color | Black |
| Optical disc player | Yes |
| Number of optical discs | 1 discs |
| Impedance | 6 Ω |
| Speaker type | - |
| Frequency range | 50 - 20000 Hz |
| RMS rated power | 30 W |
| Woofer diameter | 10 mm |
| Number of speakers | 2 |
| Total Harmonic Distortion (THD) | 10 % |
| Tuner type | Digital |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | FM |
| Preset stations quantity | 60 |
| Volume control | Rotary |
| Power source | AC |
| Input voltage | 100-240 V |
| Input frequency | 50 - 60 Hz |
| Power consumption (standby) | 3 W |
| Power consumption (typical) | 21 W |
| Bluetooth version | 4.0 |
| Headphone connectivity | 3.5 mm |
| USB 2.0 ports quantity | 1 |
| Bluetooth profiles | A2DP, AVRCP |
| Apple docking compatibility | Not supported |
| Audio formats supported | MP3, WMA |
Weight and Dimensions| Main unit weight | 1800 g |
|---|---|
| Main unit dimensions (WxDxH) | 180 x 279 x 143 mm |
Proper unit placement, ventilation, and environmental conditions for optimal performance.
Critical safety advice on voltage, lightning, batteries, hearing, and product warnings.
Instructions for connecting speakers and FM/AM antennas to the unit.
Step-by-step guide for playing music from a CD.
Instructions for playing music from a connected USB device.
Detailed steps for pairing and playing music wirelessly via Bluetooth.
Common operational issues with the unit and their corresponding solutions.
Troubleshooting steps for problems encountered with the remote control.
Solutions for common problems encountered during CD playback.
Solutions for problems related to Bluetooth pairing, connection, and audio interruption.
Solutions for issues related to USB device playback, including recognition and file compatibility.
Troubleshooting steps for issues with FM/AM radio reception, such as noise.
To Next Page
