To Next Page
M
Michael SummersJul 26, 2025
What to do if no effect is applied on Yamaha Music Mixer?
- BBrian BoyerJul 26, 2025
If no effect is being applied on your Yamaha Music Mixer, ensure that the PARAMETER control and FX RTN fader are correctly adjusted.
What to do if no effect is applied on Yamaha Music Mixer?
If no effect is being applied on your Yamaha Music Mixer, ensure that the PARAMETER control and FX RTN fader are correctly adjusted.
What to do if there is no sound from my Yamaha Music Mixer?
If there is no sound coming from your Yamaha Music Mixer, ensure that the PFL switch is turned off and the switch is set to ANALOG.
Why is the sound faint, distorted, or noisy on my Yamaha MGP12X Music Mixer?
If the sound from your Yamaha Music Mixer is faint, distorted, or noisy: * Ensure the switch is turned off when a low-level source, like a microphone, is input. * Connect to only one jack on each channel. * If using condenser microphones, check if the +48V switch is ON. * Note that when a signal is constantly input to CH4 (MGP12X)/CH8 (MGP16X), the sound becomes faint.
Why doesn't the level meter show the output signal level on my Yamaha Music Mixer?
If the level meter on your Yamaha Music Mixer isn’t showing the output signal level, make sure to turn off the PFL switch.
How to output a monitor signal through speakers on Yamaha MGP12X?
To output a monitor signal for the Yamaha Music Mixer through speakers, make sure to adjust the level of output signal from the MONITOR OUT jack with the MONITOR/PHONES control.
General| Frequency range | 20 - 20000 Hz |
|---|---|
| Channels quantity | 12 channels |
| Digital sound processing | - bit |
| Total Harmonic Distortion (THD) | 0.02 % |
| AC input voltage | 100-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 45 W |
| USB port | Yes |
| Product color | Black |
| Video capability | - |
Weight and Dimensions| Depth | 495 mm |
|---|---|
| Width | 348 mm |
| Height | 143 mm |
| Weight | 7500 g |
Essential safety guidelines for operating the device safely and preventing hazards.
Precautions related to power supply, cord, and plug usage to prevent electric shock and damage.
Warnings about exposing the device to water or fire hazards to prevent damage.
Guidelines for proper handling, placement, cleaning, and maintenance to prevent damage.
Describes the high-quality Class-A discrete microphone preamplifiers with inverted Darlington circuits.
Details the shelving EQ on mono channels utilizing VCM technology for musical character.
Explains the built-in REV-X and SPX digital effect blocks for sound enhancement.
Describes convenient functions for events: Ducker, Leveler, and Stereo Image.
Details the USB port for connecting and charging iPod/iPhone devices.
Explains the difference between balanced and unbalanced cables and common connector types.
Provides tips on using equalization and gain to achieve a cleaner, more balanced mix.
Explains the use of compression for smoothing dynamics and high-pass filters for noise reduction.
Offers advice on starting a mix by prioritizing main instruments or vocals for better balance.
Illustrates a typical connection diagram for live sound reinforcement applications.
Provides a setup diagram for common event and party audio configurations.
Details the process and precautions for mounting the unit in an equipment rack.
Explains how to attach a protective cover to prevent accidental operation of front panel controls.
Guides users through preparing the power supply and making initial audio connections.
Details the correct power-up sequence and how to achieve sound output to speakers.
Guides users on selecting and adjusting the mixer's internal digital reverb and delay effects.
Explains how to set up and use the Ducker function for automatic background music volume control.
Identifies and explains the functions of controls and connectors on the mixer's front panel.
Details the input and output connectors located on the mixer's rear panel.
Illustrates the internal path of audio signals through the mixer.
Describes the main control blocks for mono, stereo, and mono/stereo input channels.
Explains specific channel controls like Leveler, Gain, EQ, COMP, and FX adjustments.
Details master controls, iPod/iPhone connectivity, and routing options.
Guides on using built-in digital effects and accessing the detailed setting mode.
Explains effect selection, TAP tempo, and PFL/AFL monitoring functions.
Describes meter display, headphone output, and RETURN/2TR IN connectors.
Details SEND MASTER, GROUP, and STEREO master faders and their functions.
Provides detailed explanations of specific input connectors on the rear panel.
Details master output connectors and the mixer's power supply section.
Lists the available internal digital effects, their parameters, and descriptions.
Provides a list of all input/output jacks with their polarities and configurations.
Lists the technical specifications of the mixer, including electrical characteristics and general data.
Details the electrical characteristics of the mixer's analog input connectors.
Details the electrical characteristics of the mixer's analog output connectors.
Provides the physical dimensions of the MGP16X and MGP12X models.
Illustrates the internal block diagram and signal flow with level information.
Compliance information for FCC regulations in the USA.
Compliance information for Canadian Class B digital apparatus.
Wiring instructions for the mains lead in the United Kingdom.
Guidelines for environmentally responsible disposal of old electrical and electronic equipment.
