22
MOX6/MOX8 Owner’s Manual
Modes
There are several operation modes in this instrument,
and they can be selected by using the ten Mode
buttons, 1 – ). In addition, there are three “global”
modes (Edit, Job and Store) common to all of these
modes, and they can be selected by using buttons
! – #.
Quick Guide
No. Button Mode Description
1
[VOICE] Voice mode This synthesizer has a wealth of high quality, dynamic sounds—also referred to as “Voices.” You can
play these Voices—one Voice at a time—from the keyboard in the Voice mode. This mode also lets
you create your own original Voices.
2
[PERFORM] Performance mode
This mode lets you play and create Performances. A Performance lets you put several different Voices
together in layers or play different two Voices in a keyboard split.
3
[MASTER] Master mode This mode lets you register settings that you often use in the Voice, Performance, Song or Pattern
mode, and instantly recall the relevant mode and custom settings together in a single button press
—
without having to first select a mode. In addition, this mode lets you divide the keyboard into four
separate sections—just as if you were playing four different MIDI keyboards.
4
[SONG] Song mode This mode lets you record, edit and play your own original Songs.
5
[PATTERN] Pattern mode This mode lets you play, record, edit and play your own original rhythm patterns, which can be used
to make up a Song.
6
[MIXING] Song Mixing mode/
Pattern Mixing mode
This mode lets you set up detailed parameters of the multi-timbral tone generator for use with Song/
Pattern playback.
7
[FILE] File mode This mode lets you save data you’ve created on this instrument to a USB flash memory device, and
allows you to load data from the USB flash memory device to the MOX6/MOX8.
8
[UTILITY] Utility mode This mode lets you set parameters that apply to the entire system of this instrument.
9
[QUICK SETUP] Quick Setup mode This mode lets you register up to six settings for MIDI connection and Audio connection between
this instrument and the computer as “Quick Setups,” and instantly recall the custom settings with a
single button press.
)
[DAW REMOTE] Remote mode
This mode lets you control DAW software on your computer from the panel controls of the instrument.
!
[EDIT] Edit This mode lets you edit various parameters in each of the Voice, Performance, Song, Pattern and
Master modes.
@
[JOB] Job This mode lets you execute various commands such as Initialize, Copy, and MIDI data conversion—
useful for creating your original programs.
#
[STORE] Store This mode lets you store the edited program to internal memory.
To Next Page
Loading...
Need help?
General
