MOX6/MOX8 Owner’s Manual
Quick Guide
37
8 Press the [LEVEL] meter button so that the
[A/D
INPUT] lamp lights, then adjust the input level
by
using the [GAIN] knob.
NOTE Adjust the [GAIN] knob to raise the input level as far as
possible without allowing distortion to occur.
9 Press the [VOICE] button, then select the desired
Voice.
Play the keyboard wile you sing into the microphone or play
back the audio equipment.
10 If necessary, press the [STORE] button to store
the Voice.
Playing the keyboard along with
Vocoder
This instrument features a Vocoder function. This is a
distinctive, “robot voice” effect which extracts the
characteristic of the microphone sound and adds it to the
sound of your keyboard performance. In these example
instructions, you’ll learn how to use the Vocoder in the Voice
mode.
NOTE For details about the Vocoder, see the “Reference Manual” PDF
document.
1 Connect the microphone by following steps 1 – 8
on the previous page.
2 Press the [VOICE] button, then select the desired
Voice to which the Vocoder is applied.
This instrument features special Voices specifically designed
for use with the Vocoder. Call up the Category Search display
then select the desired Voice from the “Vocoder” Main
Category.
NOTE
If you use the Vocoder effect in the Performance/Song/Pattern
mode, assign the Voice for the Vocoder to Part 1. Vocoder
cannot be applied to any of the other Parts.
3 Press [EDIT] [COMMON] [F6] EFFECT [SF1]
CONNECT, then set the “InsEF Connect” parameter
to “vocoder.”
NOTE The “InsEF Connect” parameter is automatically set to
“vocoder” if you select a Voice from the Vocoder Category in
step 2.
4 From the [SF2] VOCODER display, set the Vocoder
related parameters if necessary.
Speak or sing into the microphone while pressing the note(s)
to generate the machine-like Vocoder sound. Set the related
parameters as desired while listening to the Vocoder sound.
For details about each parameter, see the “Reference Manual”
PDF document.
5 Press the [STORE] button to call up the Store
display then store the settings as a User Voice.
[LEVEL] meter button
[LEVEL] meter
To Next Page
Loading...
Need help?
General
